Sizing note: Allow adjustment for seasonal clothing. Seat and leg straps are lined with soft brown oil tanned top grain steer hide leather. This saddle offers the climber a sliding dee saddle with a seat/leg strap combination.
Its fluid interior design and Keylock system facilitate manipulations. The D shape is particularly suited for connection to equipment such as descenders or positioning lanyards. The asymmetrical aluminum Am'D carabiner has a D shape particularly suited...
Certification(s): CE EN 362, EAC, NFPA 1983 Technical Use: Specs
The keylock system prevents snagging on your rope or bolts. They develop and produce each part in their home country of Italy. Kong equipped this carabiner with a Keylock system. They test each piece to ensure the utmost safety and manufacturing excellence.
Automatic sleeve suitable for professional use: Product Features
Rated to 310 lb, tensilestrength 5,000 lb. Provides temporary anchorage to overhead support beam for fall protection systems! 1 3/4" webbing cross-arm strap features a D-ring which slips through a web loop.
Provides temporary anchorage to overhead support beam for fall protection systems: Product Features
11.7mm (0.5 in) diameter. This design provides a rope with good feel that works very well with mechanical ascension devices. Great for advanced and traditional techniques. Smoothest cover for mechanical ascension; low elongation with minimal bounce.
A full 1/2-inch, 24-strand rope! Samson Vortex climbing line is your safe and secure stronghold at the center of activity when you are ascending a tree. The 24-strand cover is a FULL 1/2-inch (12.7mm) for easy handling.
Meets OSHA, ANSI and CSA requirements. 6' length, single leg. Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest...
Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard: Product Features
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections: Product Features
Not to be used with chainsaws over 15 lbs. Hi-Vis yellow with a 6 inch nylon loop and twist half hitch. Of force is applied! Buckingham's tear away bungee chain saw lanyard holds a chain saw if dropped to one's feet, but will pull apart if the chain saw...
1 and 1/8 inch ring used to attach the lanyard to your saddle: Specs
Measures 32 inches when relaxed: Specs
1 and 3/4 inch ring for saw suspension on saddle when not in use: Specs
Measures up to 50 inches fully extended to provide ample reach when cutting: Specs
Climbing line diameter must be equal or greater than the Blue Streak (12mm). Snap version (HP26) features Buckingham's Steel Safety Snaps. Prusik devices are common for 2 in 1 safety lanyards and also as friction hitches for climbing lines, only when...
Available with a safety snap (HP26), or as an eye-to-eye (same as HP26 but no snap): Specs
Made from Samson Tenex rope! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is more evenly distributed for improved performance.
Note: Knots and bending used to secure the sling will reduce workload limit. For best results, a cow hitch is typically used to secure in place. Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure...
Stainless steel sideplates and axle. Aluminum sheave and bushing. Aluminum wheel, 3" tread depth, 3/4" max rope diameter. Acts as a false crotch using rigging lines and friction device to lower cut material.
Minimum breaking strength 40,000 lbs.: Specs
Aluminum sheave and bushing.: Specs
Sheave (pulley wheel) is 1.125" wide x 3.455" high.: Specs
Allows you to launch nearly straight up which is nearly impossible to do by hand. We recommend using the Big Shot with at least 8ft of pole length to eliminate recoil and maximize launch distance of 3 to 20 ounce weights and line.
We recommend using two 4 foot poles together on the ground (included with the BIGKIT and BIGK kits) to eliminate recoil and maximize launch distance: Product Features
Launches throw-weights nearly 200 feet: Product Features
One (1) BIG1 Head: Specs
One (1) FP400B Leonard 4-foot Orange Fiberglass Base Pole: Specs
11mm (0.5in) diameter. Works very well with mechanical ascension devices. Extremely light with great feel and knot-tying characteristics. Has smoothest cover for mechanical ascension; low elongation with minimal bounce.
The AVAO BOD harness has a specific construction that allows the user to hang from the dorsal attachment point for a longer time in case of a fall. The harness also facilitates carrying and organization of tools with multiple equipment loops and retainers...
The keylock system prevents snagging on your rope or bolts. A wide gate opening and high tensile strength! Kong manufactures this carabiner using a high-quality aluminum alloy. They test each piece to ensure the utmost safety and manufacturing excellence.
D-shape prevents rotation and distributes load along major axis: Product Features
Rope diameter (mm): 26: Specs
Length (mm): 114: Specs
Twist lock sleeve opens in 2 easy movements: Product Features
All polyester climbing rope with high strength, low stretch, excellent abrasion resistance and a long service life! The single braid construction eliminates the need for milking and stays firm and round in use.
Pictured with Galvanized Thimble sold separately. Use with extra high strength or common cable, left hand lay only. For tree cabling and bracing! Tree grip dead-ends wrap quickly around cable, ends time consuming splicing and clamping, maintains original...
The unique shape and wide opening make this a versatile carabiner. They test each piece to ensure the utmost safety and manufacturing excellence. Kong manufactures each of their carabiners with the highest possible quality.