Animal Identification Animal Care For Sale In Illinois

Ideal for use with 1589 Ring Fastener and Coburn Cattle Tags for heavy-duty animal identification. Chain is 40" long. Carton of 50 - Straight Link Plated Neck Chain is a quality low-cost chain.

Available only in white. Use to secure neck rope.

Angle-cut tip allows thick or thin marking. Will mark approximately 2500 digits. This Heavy Duty Black Marker works on ear tags or neck tags and has many other uses.

Packaged complete with two pins (one loaded and one replacement), the retract-o-matic is for use with Allflex Global and Global Tamperproof tags. Retract-o-matic applies the tag with one squeeze, and the pin powers back before the animal has a chance...

Bends the hasp wire ends quickly and easily. Bending tool for Boc-Loc Hasp.

Twelve spaces are available on each chain. Also available as a 4-chain Rotary Plier. The 5-chain Rotary Pliers shown above may be customized with any patterns of letters, numbers or blank spaces.

Replacement cutting tube for Toggle Punch.

8” overall length. Rope-Type Leader has 3” diameter nosepiece and is made of carbon steel for heavy duty use.

Please note in the comment section the required numbers with either a number range or a comma separated value, e.g. 1-24 or 45, 617, 5589. Numbers show up twice and are positioned to show on both sides of the neck.

Studs are treated with Infecta+Guard. This enables use of many systems such as Electronic Sow Feeding and advanced herd management software programs. E.Tags may be read by all ISO-compliant readers with a read-range of up to 4 feet in optimal conditions...

1/0 twisted link with plated finish. Made for identification; not for restraint. For use with neck tags. Made in the USA. Welded Steel Chain - sold in 40" lengths.

Made in the USA. Made of tough nylon with reinforced neck ring opening. Up to 5 digits available. Measures 2.25" wide x 3.5" tall. Please note in the comments the numbers required by either a sequence or a comma separated value, e.g. 1-24 or 48, 70, 360.

When cord is inserted in all 3 holes, a strong pull will release the animal. If inserted in 3 holes and the loose ends tucked under, cord will hold until broken. Carton of 500 - Heavily plated steel V-Fastener is used with Poly Neck Cord and Cattle Neck...

The latch helps prevent the gate end from sagging and putting stress on the hinges. Complete kit included latch, receiver, and all necessary bolts and hardware to fit 1-5/8" to 2" round tube gates and accepts a padlock (not included).

Available in numerals 0 through 9, number sleeves will fit neck straps that are 1-5/8" wide. Package of 12 - Yellow Plastic Neck Strap Sleeves slip onto the neck strap for cattle identification.

One dozen, bagged or bulk pack, weigh 4 lbs. Halters are available in black, red, blue or green and can be ordered either bagged individually or bulk packed by the dozen. Ends are heat-welded and poly-wrapped and contain no metal clamps.

The Z-Tag Applicator comes complete with a spare pin neatly stored in the handle. Package of 3 - Application of Farnam Z-Tags is a breeze with this applicator, which has a rotating pin that allows for one-motion operation.

Long lead shank is made with single thickness nylon web and has 24" swivel chain and heavy duty snap. Also available in RED and BROWN.

Gate wheel includes all necessary hardware, and will fit round tube from 1-5/8" to 2". Installing the gate wheel permits the fence gate to open and close with ease and helps prevent the gate from sagging and straining the hinges.

2.5" diameter welded ring is looped through 2" X 2" fastening plate with 4 screw holes. Galvanized steel Barn Tie Ring may be fastened anywhere in the barn for tying animals or other uses.

Small Blank studs only with no back and plastic tip. 6 packages of 25 each = 150 tags total.

Metal buckle for neck strap.

Made in the USA. Material of woven nylon with polypropylene core. Available in 6 colors. Made for identification - not for restraint. Flexible but will not go limp.

Twelve spaces are available on each chain. Also available as a 5-chain Rotary Plier. The 4-chain Rotary Pliers shown above may be customized with any patterns of letters, numbers or blank spaces.

Pliers hold up to 5 digits. Positive ear release lifts needles, prevents scratches and blurred tattoos. Easy change digits can't be inserted upside down. To produce tattoos with repeating digits such as 22, 222, etc., you will need to order extra digits.

One dozen, bagged or bulk pack, weigh 4 lbs. Halters are available in black, red, blue or green and can be ordered either bagged individually or bulk packed by the dozen. Ends are heat-welded and poly-wrapped and contain no metal clamps.

Applicator toggle punch for installing Boc-Loc.