Velcro climbing pads have a double back cinch loop that provides a snug fit to the leg! Steel insert keeps the climber stationary and is compatible with Buckingham titanium/steel and Bashlin aluminum climbers.
A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied! Pressing the Grillon lever will release the line even under load, for quick positioning.
Product Features
Available in a 9ft. or 15ft. lanyard: Specs
Reinforced eyes on each end for carabiners (carabiners are not included): Product Features
Connects to the side or waist attachment points of a harness with carabiners (sold separately): Product Features
Ship wt: 2 lbs.
The rope is lightweight, flexible, abrasion resistant nylon and includes a protective sleeve for reduced contact to abrasive surfaces: Product Features
A firm polyester double braided rope with high strength, low stretch and excellent resistance to wear! Added coating provides additional abrasion resistance. Arborists commonly use Stable Braid in combination with block pulleys and slings for a strong,...
Aluminum pulley for arborist use! Uses a 1/2 inch rope. The minimum breaking strength is 3,800 lbs. Has aluminum sideplates and aluminum sheave, and the sheave has a bearing in the axle.
Sizing note: Allow adjustment for seasonal clothing. Sliding ring saddle with seat and leg straps. This saddle offers the climber a sliding dee saddle with a seat/leg strap combination.
Kong manufactures each of their carabiners with the highest possible quality. Kong equipped this carabiner with a Keylock system. This carabiner features an automatic sleeve and an eyelet.
Specs
Product Features
Weight (grams): 95: Specs
Minor axis load (kN): 7: Specs
Open gate load (kN): N/A: Specs
Body diameter (mm): 11: Specs
Automatic sleeve suitable for professional use: Product Features
The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with the double back buckle and comes with a quick gate connector for attachment to the ascension device.
Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
Popular Steel Tree Climber Set with 3 & 1/2" permanent gaff! Contoured shank accommodates the ankle bone and the offset stirrup sits in the center of the foot. High quality 3/4" cushion leather pads with 3 loops and tunnel design to keep climbers stationary.
Consists of our CSR312 climbers, leather pads, and nylon leg & foot straps: Specs
The long gaff is good for thick-bark trees: Product Features
Available in: SM - XL. The Glide Lite saddle emphasizes safety and versatility, all in a light weight 3.6 lb package. Aluminum O-right attachment point and rope bridge allow for added lateral movement.
Holds its shape even with heavy use! Pro-Master 3-strand twisted rigging line. For price and performance there isn't a better three-strand rigging rope in the marketplace. Spun fiber on the surface offers excellent grip and knot holding.
Specs
Color: White with green ink stripe
Diameter: 1/2-inch
Working Load: 630 lb
Length: 150 feet
Excellent chemical resistance: Specs
Constructed of spun and filament polyester jacket fibers covering polyolefin core fibers: Specs
Rated to 18,000 lb. Accepts up to 3/4" rope. Designed to attach anchorage and fiddle blocks! Secure rope retention bar eliminates loss of wrap. Lbf., 2,000 WLL.. For added safety, a formed rope retention bar has been added.
Thick Cotton Saddle with Four D-rings for more stability. 1" neoprene leg straps keep the seat strap in place during use. Sizing note: Allow adjustment for seasonal clothing. The back features five round loops for accessory storage and also snap and ring...
Specs
Weight 5.2 pounds: Specs
Waist Size: 30-34 inches (20-inch Dee to Dee)
1-inch neoprene leg straps: Specs
Two nylon utility straps; one with a 2-inch nickel-plated ring, the other with a 2-inch nickel plated snap: Specs
Includes Big Shot head and 2- 4ft extension poles. Allows you to launch nearly straight up which is nearly impossible to do by hand. Pick up a Big Shot Trigger and improve accuracy and reduce arm fatigue!
Product Features
Specs
Launches throw-weights nearly 200 feet: Product Features
We recommend using two 4 foot poles together on the ground (included with the BIGKIT and BIGK kits) to eliminate recoil and maximize launch distance: Product Features
One (1) FP400 Leonard 4-foot Orange Fiberglass Sectional Pole: Specs
Two (2) Jameson 4-foot Fiberglass Poles: Specs
One (1) FP400B Leonard 4-foot Orange Fiberglass Base Pole: Specs
A myriad of uses, but commonly used for one handed advance of friction hitches along the climbing line! Tensile: 7,000 lb WLL: 700 lb Sheave: Alum. Rope Dia: 1/2"Weight: 2.4 oz Sheave Dia: 1-1/4"Side Plate: Alum.
For tree cabling and bracing! Tree grip dead-ends wrap quickly around cable, ends time consuming splicing and clamping, maintains original breaking strength. Use with extra high strength or common cable, left hand lay only.
Double braid construction nylon over polyester. A full 1/2-inch, 24-strand rope! Samson Vortex climbing line is your safe and secure stronghold at the center of activity when you are ascending a tree.
This knot tying kit includes one PRO-KNOT Rope Knot Card, two hanks of high quality static line cord and a practice caribiner. 20 essential knots cover most any rope tying situation: Bowline, Square Knot, Water Knot, Rolling Hitch, Sheet Bend (Doubled...
It can be connected to the CAPTIV bar to favor positioning of the carabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device. Its fluid interior design and Keylock system facilitate manipulations.
Specs
Material(s): aluminum: Specs
Certification(s): CE EN 362, EAC, NFPA 1983 Technical Use: Specs
Riveted for extra strength! Lower straps are necessary to secure spur sets to the climber's leg. Durable, weather resistant neoprene impregnated nylon. Ten holes for perfect adjustment and nickel plated hardware.
For enhanced torso movement. Interlocking leg buckles and tongue buckle waist. Classic traverse saddle comes with two sliding suspension Dee rings and a batten seat design.
Lanyard length adjusts with only one hand! And the adjustable cam is always in easy reach, no need to reach around the tree for that friction knot. Unique rope grab with 90 twist eliminates need for swivel or twisted clevis.
Product Features
The red "wear indicator" tells you when it is time to replace it (not repair, replace): Product Benefits
With the LAD at the user's side, (where it's needed) no longer will the user have to hug the tree to adjust his lanyard.: Product Features
Red core alerts you of excess wear: Product Features
Double layered leather palm, breathable stretch nylon back. Protect your hands when you belay/rappel and still have the dexterity needed to tie knots and work with hardware! Low-profile neoprene cuff with a reinforced carabiner hole to attach to your...
Product Features
Back made of breathable stretch nylon for excellent fit and ventilation: Product Features
Made of high quality leather for the perfect balance of durability and dexterity: Product Features
Carabiner hole to attach gloves to harness: Product Features
For anyone who wants to climb - for work or for fun - its easy if you have good training! Your teacher is Peter "Treeman" Jenkins, the father of recreational tree climbing and an ISA-certified arborist and former production climber.
Product Features
Tree selection and risk assessment: Product Features
A safety snap on either end with thimble on spliced end for freedom of movement! Heavy duty 1/2 inch Walthane coated, double braid polyester rope. 5,000 tensile strength. Adjustable from 3 to 6 feet.
