Accessories Livestock Supplies For Sale In Saskatoon

Connect and transfer power from 1 strand of 1/4” electric rope or braid to another. Features 2 double-post rope clamps and joined by 32” of 12 gauge, shielded wire. May be used to terminate the rope at the end of the fence.

Safe-T post caps are designed to conform to a wide range of steel post sizes and stay on tight, eliminating the hazards of sharp, jagged post tops. Protect your valuable horses and livestock from serious injury and unsightly scrapes.

Easy to use and portable! Install the S10 or S16 Energizer on a Gallagher Ring Top Post (#40990) using this post mount.

Connect a fence energizer to 1/4” electric rope or braid. Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire. May also be used to terminate the rope at the end of the strand.

Dual function tool used to check electic fence voltages and locate fence line faults. A significant change in current ampere readings between one point and the next indicates the presence of a fault between these two points.

Close your barbed wire gates with an easy crank handle. A lock can be added to keep out unwanted guests. Comes with 2 large screws and spring pin. Mounts with 2 large screws. All steel handle with heavy galvanized steel cable.

Contains 3 six foot galvanized rods, 3 heavy duty clamps, 48' connection wire and complete instructions. Complete ground rod kit to get the most from your electric fence system.

It replaces the standard rails on the Model 3200 Automatic Egg Turner and holds up to 120 eggs - each rail holds 20 eggs. Farm Innovators Quail Rails for Automatic Egg Turner are designed for quail and other small eggs.

Little Giant Beekeeping Tyvek Coverall with a full-front zipper closure will keep you protected while caring for your bees. Elastic closures at both the sleeves and ankles will keep out bees.

Little Giant 2nd Edition Beekeeping for Dummies by Howland Blackiston is a comprehensive training guide for all things beekeeping. The book will walk you through the tools of beekeeping, the steps necessary to build and maintain your own beehives, and...

High speed cutter engraves 1/4" bold mark. Grinding bit used with Dremel tool to engrave Ritchey tags.

The half spring, springload internal mechanism will not allow you to over stretch. Premium gate handle with comfortable rubber grip and unique internal overstretch protection.

Enables you to test the "control factor" of your system and assist you in fault finding, at a very reasonable price. Test voltage under "load" on your fence. Reads from 1,000-10,000 volts; lights glow in sequence to indicate approximate voltage.

It can tension around corners and up to 660 ft. This part functions to tighten and splice two long sections of rail. In each direction (1320 ft. The two way barrel tensioner is a CenFlex rail accessory.

Little Giant Bee Escape Porter Style is a one-way valve that allows bees to leave but does not allow them back into the hive box. It is a great way to clear bees from a box of honey with minimal stress to the beekeeper and the bees.

The termination bracket is a CenFlex rail accessory. This bracket functions to terminate or anchor the end of a rail on an end or gate post. Simple design requires no wire stripping or special tools, making termination quick and easy.

Extra Pin for the Z-Tag Applicator.

The CenFlex bracket is a CenFlex rail accessory. A bracket is needed to secure each rail to line and corner post. The belt-loop design allows the rail to slip through for easy tensioning and rail flexibility.

The one way barrel tensioner is a CenFlex rail accessory. It can tension around corners and up to 660 ft. For every major directional change. Of straight fence line. This piece functions to tension and terminate the rail at gate or end post.

The Insulated End Strainer is a heavy duty, all-in-one, corrosion-resistant assembly to insulate, and tighten up to 4 mm/15 gauge fence wire. 12-tooth spool for fine adjustment, robust, high-quality, spring-loaded locking clip.

Now with a broad and fine tip all in one! Ink is released onto fiber tip by applying enough pressure to open internal valve.

Complete with caps. Vinyl sleeve fits 4" x 4" x 5' posts including gates and corners.

Got this for my husband for xmas. Iys exactly what he was looking for and it was the most inexpensive for the quality. Good experience for the start.

Helps protect your 110-volt plug in energizer from power surges caused by lightning strikes. Plugs into any 110 volt outlet, limits high voltage spikes to 350 volts. Absorbs up to 34 watts of transient power.

The Y-Tex UltraTagger Plus for EID and TamperProof tags applies Y-Tex Electronic ID and Tamperproof Tags. Ultra light, ultra fast, and ultra durable. Applies all Y-TEX RFID and Tamper Evident tags.

Grinding bit used with Dremel tool to engrave Ritchey tags.