Accessories Generator Accessories For Sale In Mcallen

Some municipalities require the use of stainless steel fuel lines instead of the standard hoses provided with the diesel generator products. These stainless steel lines are fire resistant for additional safety.

The oil pan heater kit warms the oil pan making starting easier and warm-up quicker. The oil pan heater kit is recommended in climates where the temperature falls below (32°F). Turns on when the temperature at the thermostat falls below approximately...

Protect your investment. This theft deterrent powder-coated steel bracket with tamper proof bolts prevents thieves from cutting the plastic handle and removing the cable lock or chain (sold separately).

This is RV/Generator/Transfer switch Adapter Locking Adapter. It is RV/Generator TT-30P 30 Amp Plug to L14-30R 4-Prong 30 Amp Locking Female Connector (Hots Bridged). This is a Super Durable Over Molded Adapter.

Equipped with an integrated kickstand to help get optimal angle to the sun. Rugged, durable and rigid. The Boulder 200 Solar Panel is built with strong tempered glass and an aluminum frame with added corner protection for temporary or permanent installation.

After 200 hours of use or 2-years of ownership, use the Generic 6 kW 530 cc EcoGen. Air-Cooled Generator Scheduled Maintenance Kit to perform complete maintenance. It keeps your generator running smooth.

The automatically controlled thermostat in the Generac Cold Weather Kit for Generac 3.0, 4.6, 5.4 and 6.8 l Direct Drive Units activates the battery warmer when temperatures fall below an acceptable level, helping your generator maintain an ideal battery...

Remember when you could clean the inside of your generator. The WEN Magnetic Dipstick extends the lifespan of your inverter generator by catching the loose metal filaments that naturally build up inside the oil tank.

The Sportsman Series Generator Covers are the best way to protect your valuable investment. These Generator Covers won't stretch and shrink in hot or cold temperatures and helps keep dust and dirt off the generator during storage.

It is Generator/Temporary Power Locking Adapter. It is NEMA L14-30P 30 Amp 125/250-Volt 4--prong locking plug to L14-20R 4-Prong 20 Amp Locking Female Connector. This is a Super Durable Over Molded Adapter.

Drop it into water and you're ready to clean. Clean your car, your pet or yourself. The built-in water pump can be placed into a bucket, and it sprays water through the hose just like a shower head.

The Briggs & Stratton 6179 Maintenance Kit is for use on GE Model 382-613 13,000-Watt Home Generator System. For more than a century, Briggs & Stratton branded engines and power equipment have helped consumers get the job done.

Briggs & Stratton products are designed, manufactured, marketed and serviced in over 100 countries on all seven continents. The Briggs & Stratton 6231 Standby Generator Cold Weather Kit will help ensure smooth starting and reliable operation in the winter...

The cart is compatible with any air cooled Generic model. The Generator Transport Cart is designed to easily move and position any of the air-cooled generators without the need for additional people or equipment.

This Small Inverter Generator Cover for 2,600-Watt Units and Smaller allows the user to protect their inverter generator from being exposed to the weather or scratches. LIFAN Power USA is proud to offer the full line of LIFAN Power Equipment.

When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability. The Cold Weather Kits for the Protector Series consist of a block heater with all necessary mounting hardware and a battery...

The Champion Power Equipment C90010 Weather-Resistant Storage Cover is designed to fit your 2000 Watt inverter to keep it safe, clean and dry. Whether your inverter is on a dirty job or in storage, this cover provides vital protection.

This parallel kit is built to hold up featuring heavy-duty construction and universal mounting tabs. Connect two Inverter Generators and get twice the power. Double your power output for heavier power needs.

It is not used independently. The spill box drain back kit allows fuel that was captured in the 5 Gal. This kit is only used in conjunction with the 5 Gal. Spill box to be drained directly back into the fuel tank to avoid vapors.

Maintenance is recommended at every 200-hours or 2-years. The Generac Scheduled Maintenance Kit for Generac Air-Cooled Generators is designed for use with Generac air-cooled generators.

For more than a century, Briggs & Stratton branded engines and power equipment have helped consumers get the job done. The Briggs & Stratton 6036 Standby Generator Maintenance Kit helps you keep your Empower series standby generator working at optimal...

Made specifically for Firman Power Equipment Generators, this wheel kit was designed for ease of portability, strength, and durability. Includes two 8.0 in. Never Flat Wheels with Axle Pin for easy installation, high leverage Single Folding Handle with...

Featuring a heat and cold resistant thermoplastic jacket, you can be sure your power cord will remain flexible and function perfectly whether the temperature outside is extremely hot or extremely cold.

Keeps your KOHLER Generator running at peak performance with KOHLER Maintenance Kits, featuring genuine KOHLER oil and parts. Regular maintenance will extend generator life, promote powerful performance, prevent costly repairs and ensure ease of starting.

This is an Industrial/Generator Locking Adapter. It is NEMA L14-30P 30 Amp 125/250-Volt 4--prong locking plug to L6-20R 3-Prong 20 Amp 250-Volt Locking Female. This is a Super Durable Over Molded Adapter.

The enclosure is the generator's first line of defense against the elements and it's important to keep it in good condition. Use the paint kit to touch up scratches and other damage to protect from future corrosion.

The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands. Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller.