Accessories Electric Fencing For Sale In Columbus

These bright white 3" x 5" plastic markers give you a safer, more visible fence, even at night. Comes packed 12 flags and 12 K-Clips per bag. The stainless steel K-Clips instantly attaches to existing wire fences for geater visibility.

Fits the 13-19' and 18-24' gate.

Recommended for regular maintenance of fence line. No battery required. The Zareba Systems Eight-Light Voltage Tester measures fence line voltage. Works with all types of fence wire.

Appropriate for use with 1/8" and 1/4" electric rope. A quick, convenient way to splice Hot Rope for a better, stronger splice.

Starts working when your fence stops. 1-year warranty. Provides an instant warning of low or intermittent voltages to detect fencing problems during hours of darkness. Attach to fences near roadways, driveways, buildings, etc., anywhere fence is passed...

The half spring, springload internal mechanism will not allow you to over stretch. Premium gate handle with comfortable rubber grip and unique internal overstretch protection.

A simple 8-light power indicator for standard or low impedance fencers. Convenient extra long 68" ground cord. The lights are calibrated to illuminate from 625 to 7000 volts.

Complete with gate handle, 2 tensioners and 20' tape.

Comes complete with two 2-way gate anchors. Electri-Gate is a high conductive stretchable cord with a high impact plastic handle. Has an in-line length adjustor for gates from 8 ft.

Connecting gates to a single post.

Switch off a section of fence for maintenance and routine checks. Gallagher Cut-Off Switch (Knife) is used at gates and for easy location of fault finding.

Used for adjusting wire tension with the wire strainers.

Safe-T post caps are designed to conform to a wide range of steel post sizes and stay on tight, eliminating the hazards of sharp, jagged post tops. Protect your valuable horses and livestock from serious injury and unsightly scrapes.

Safe to use with high visiblity handle with large shields. Gallagher Electric Bungy Gate is a pre-assembled gate-bungy cord that stretched to twice its length (from 11-1/2 to 23 in.)and is ideal for on/off laneways.

High visibility black and white expandable electric bungee cord. Includes gate handle and installation hardware. Expands from 8' to 16'.

Complete with caps. Vinyl sleeve fits 4" x 4" x 5' posts including gates and corners.

To be used with fencing model numbers DF-SP-LI (27127) and MAG12SP (27128). Easily secure your fencing unit to a t-post with the help of this mounting bracket.

Connect a fence energizer to 1/4” electric rope or braid. May also be used to terminate the rope at the end of the strand. Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire.

Spring loaded PVC gate handle.

It is also useful to track down shorts. Zareba Inline Cut Off Switch is a convenient way to cut power to an electric fence at various locations along the fence.

For use with ground rods for proper electric fence grounding.

The half spring, springload internal mechanism will not allow you to over stretch. Premium gate handle with comfortable rubber grip and unique internal overstretch protection.

Rust-resistant Zareba 10-Inch Galvanized Brace Pin is for use when building corner and brace assemblies for your fence line. Use in vertical brace post corner and brace assemblies.

Recommended for high tensile wire use (usually 12.5 gauge wire). In-Line strainer constructed with a galvanized steel frame and aluminum alloy spool and features a spring loaded clip to keep from unwinding.