9 Ft Truck Bodies Only For Sale In New Mexico

Manual Roll Tarp. 52" Front with 30" Cabshield, 26" Sides, 36" Tailgate, 6" Longsills. 2000 Custom Built 9' x 96" wide Dump Body with New Floor and Rebuilt Understructure.

POWER UNIT (ELECTRIC OPTION) The hoist assembly shall be powered by a 12 Volt DC with intermittent duty motor power unit. The scissor hoist shall have a 5" x 20" lift cylinder with a 2" chromed rod that will ensure a dump angle of not less than 50 degrees.

NEW 2018 Cadet Western 9' x 96" wide Flatbed Treadplate Steel Floor, Gooseneck Compartment with 30,000lb. Open Tie Rail with Stake Pockets. Structural Channel Crossmembers and Longsills, 40" Rolled Tube Bulkhead with Sunshade.

The double wall sides are constructed of 10 gauge inside walls and 12 gauge outside walls, the top of the side shall have a 4 1/2" deep boxed top rail with a top radius bend of I 1/8".

Roll Out Tray and Low Sliding Roof. 2 Vertical and 1 Horizontal Compartment on each Side. Stahl Model CX110VVD-52.50 110" x 94" wide Service Body for 60" CA Dual Rear Wheel Truck.

CM SB MODEL SERVICE BODY- TRUCK NOT INCLUDED

Outside open tie rails and stake pockets. Rear skirt with recessed license tag bracket, LED tail lights and backup lights, and rear stake pockets. NEW 2018 Cadet Western 9' X 96" wide Flatbed.

Please Call For All Specifications & For Demolition Bed Specifications. Electric Or Hand Crank Tarp, 9" Apron, Pintle Hitch In 20 Or 50 Tons. NEW TIGER MANUFACTURING 14' DUMP BED, 70K PSI Steel, Carbon Steel, 3/16" Elliptical Body, 83" Inside Width, 97"...

9’ Knaphiede Service Body, Fits 60" Cab To Axle, Good Condition, 6 Side Compartments, Rear Liftgate, Quality Install Services Available

Actual photos are available. NEW Godwin, 184U 9'L, 18" sides, 24" tailgate,shot blasted, zinc primed & powder coated black, 3" cross members on 12" centers, comes with 24" cab shield, Champion/Godwin 524DM hoist, sub frame, ELEC/HYD pump with hyd tank,...

The double wall sides are constructed of 10 gauge inside walls and 12 gauge outside walls, the top of the side shall have a 4 1/2" deep boxed top rail with a top radius bend of I 1/8".

9’L Knaphiede Service Body, Fits 60” Can To Axle Dual Rear Wheel Trucks, Good Condition, 6 Side Compartments, Rear Tailgate, Air Hose Reel, Over Cab Rack For Trailers, Ramps, Quality Install Services Available

Please check with us for exact fitment as makes vary slightly. BRADFORD BUILT 96" X 112" STEEL WORKBED, 34" FRAME WIDTH, 60" CAB TO AXLE, FITS CAB & CHASSIS DUALLY TRUCK, GN & RECEIVER HITCH, LED LIGHTS, LIGHTED HEADACHE RACK, BLACK POWDERCOAT, 1/8" STEEL...

Please check with us for exact fitment as makes vary slightly. BRADFORD BUILT 96" X 112" STEEL 4 BOX UTILITY BED, 34" FRAME WIDTH, 60" CAB TO AXLE, LIGHTED HEADACHE RACK, LED LIGHTS, GN & RECEIVER HITCH, TAPERED REAR CORNERS, 1/8" STEEL TREADPLATE FLOOR,...

Call for more info on Rigs ups

ROLL UP REAR DOOR, CURBSIDE FORWARD SIDE DOOR, ALUMINUM RIBBED FLOOR, CHEMLITE LINED, D-PLATE REAR SECTION FLOOR, 2 ROWS E-TRACK, 91 IN INTERIOR, 96 IN WIDE, THERMOKING RDII TCI DUAL TEMP REFRIGERATION UNIT WITH 2087 HOURS

Call for more info on Rigs ups

*NEW & IN STOCK* 2018 Brandon FHA Dump Body – 16’6” Length

Can be put on any new or used cab and chassis a new body like this is over $20k and will take 6 months to build. Can be painted. 2012 morgan yellow FRP body with large Waltco Rail lift with cart stops body has a translucent roof and etrack with slats...

( 2540mm H x 2500mm W x 6400mm L) Listingdescription: 2011 ALLTRUCK FRP PANTECH BODY, Side and rear access, rear barn doors, tie rails inside, excellent condition.

We also stock Reefer and Flatbed bodies! Hundreds of high quality bodies to choose from, with several sizes available.

Used 24' Dry Van, Swing Doors, E-Trac and wood slate tie offs, Translucent roof

Please check with us for exact fitment as makes vary slightly. BRADFORD BUILT 84" X 84" STEEL WORKBED, 38" FRAME WIDTH, 40" CAB TO AXLE, GN & RECEIVER HITCH, LED LIGHTS, LIGHTED HEADACHE RACK, 1/8" STEEL TREADPLATE FLOOR, 4" FOLD-DOWN SIDES, REAR TAPERED...

2007 Supreme 24' Moving Van Box, 5' Attic

Call for more details. Full plywood lining, Hi-Lo package (includes 24” threshold plate, (4) extra crossmembers at rear, reinforced front end, & 12” scuff), translucent roof, (2) rows of E-track, 10” dock, ICC bumper.

Pu box to fit 2017-2018 Ford F250-350 trucks New red take off 8 ft.

NEW PICKUP FLATBED FOR TRUCK FOR SALE, BRADFORD BUILT 84" X 102" STEEL WORKBED, 42" FRAME WIDTH, 56" CAB TO AXLE, GN & RECEIVER HITCH, LED LIGHTS, LIGHTED HEADACHE RACK, 1/8" STEEL TREADPLATE FLOOR, 4" FOLD-DOWN SIDES, REAR TAPERED CORNERS, THIS BED FITS...