9 Ft Medium Duty Trucks For Sale In Arizona

Flatbed Body: Manufacturer: CM, Length: 9'4", Width: 90", Headboard Height: 39.6" Gooseneck Ready

It has two fuel fills, came off a 1 Ton ford. Custom made, 9 ft long by 7 ft wide. 60 INCHES CAB TO REAR AXLE CENTER--3 STORAGE BOXES BUILT IN

Wide to put on cab and chasis dually trucks,$125 xtra for light and wiring package,$100 xtra for gooseneck ball compartment Rancher 9 ft.long flatbed with headache rack, 8ft.

BRADFORD BUILT 96" X 112" STEEL WORKBED,

Shovel Basket, Ladder Rack. Includes 100 Gallon Transfer Tank, Fill-Rite Pump, Fill Nozzle with Hose Reel. Reading 108" x 96" wide Service Body for 60" CA Dual Rear Wheel Truck.

Loaded on your trailer. $3000.00 plus tax Replace your old bed but use your hydraulics. Bed can be in prime or painted black. 9' gravel beds for 1 ton trucks, has all lights, but has no hydraulics & not mounted.

Brand New Flatbeds, Steel Diamond Plate Decking, Steel Headache Rack, Rub Rail, Stake Pockets, Rear Skirt With Tail Lights, 9'-11' Flatbeds Have A Gooseneck Hitch, 12'-16' Flatbeds Have A Medium Duty Headache Rack, Quality Install Services Available.

Safety chain D-rings, and 7 way trailer plug. NEW 2018 Cadet Western 9' x 96" wide Flatbed. Treadplate steel floor, Gooseneck compartment with 30,000lb. Structural channel crossmembers and longsills, 40" rolled tube bulkhead with sunshade and recessed...

Interior Stake Pockets with Outside Pockets and Tie Straps on Sides. Smooth Steel Floor, 4 1/2" Crossmembers on 12" Centers, 5" Steel Channel Longsills w/ 34" OD. NEW Scott 9' x 96" wide City Stake Platform 10 GA.

Tailgate: Heavy duty cast quick release top hardware and cast overshot lower hardware with manual release handle. Specifications General Dimensions: Available in inside lengths from 8' through 11'-6", 84" inside width with 13" sides and 19" gate or 18"...

2017 CM SK MODEL ALUMINUM UTILITY BED,

TAILGATE The 10 gauge steel tailgate shall be high. The sub frame shall also incorporate a hoist which shall be a combination of double arm and scissor design. To allow for better adhesion a phosphate wash shall be used prior to application of the...

3/16" AR450 Steel Floor, 7 GA Steel Crossmemberless Tubular Understructure. Crysteel Quick Install LB500 Hoist mounted under body with subframe and double acting 12V electric pump.

TAILGATE The 10 gauge steel tailgate shall be high. The sub frame shall also incorporate a hoist which shall be a combination of double arm and scissor design. To allow for better adhesion a phosphate wash shall be used prior to application of the...

Stake Pockets, Flush Mount Tie Down Rings. Fits on 60" CA Dual Rear Wheel Truck with 34" wide frame. Powder Coated Steel Frame, 4" Flip Down Siderails, Headache Rack with Lights, 30,000 lb.

The tailgate handle release will allow the tailgate to drop completely in a vertical position. The rear corner post shall be 12" wide and 5" deep and constructed of 10 gauge stainless steel.

Stahl Model CX110VVD-52.50 110" x 94" wide Service Body for 60" CA Dual Rear Wheel Truck. 2 Vertical and 1 Horizontal Compartment on each Side. Roll Out Tray and Low Sliding Roof.

9’L Knaphiede Service Body, Fits 60” Can To Axle Dual Rear Wheel Trucks, Good Condition, 6 Side Compartments, Rear Tailgate, Air Hose Reel, Over Cab Rack For Trailers, Ramps, Quality Install Services Available

New 2018 Crysteel 9' x 96" Stainless Steel S-Tipper

DUMP BODY - UNDERBODY - 9'

Truck not included. 90" Door opening. MBB Interlift Railgate. 26' Long X 96" Wide Alum Van Body.

14FT X 85 X 96, 88W X 79H DOOR OPENING, MORGAN ALUM, RAMP, ETRAC

Rear skirt with recessed license tag bracket, LED tail lights and backup lights, and rear stake pockets. Outside open tie rails and stake pockets. 1/8" treadplate steel floor, Structural steel crossmembers and longsills.

Hoist and Installation Available. 6" Longsills, Crossmembers on 12" Centers. 42" Bulkhead with Mesh Window, Internal Stake Pockets. 2001 Scott 16' x 96" wide Flatbed with Smooth Steel Floor.

6" board pockets, LED lighting with one-piece wiring harness. 40" Front with Tapered Integral 1/4 Cabshield. New 2018 Crysteel 9'4" x 96" Aluminum A-Tipper. Crysteel Quick Install LB510 Hoist mounted under body with subframe and double acting 12V electric...

26’L 102”W 103”H Van Body, Duraplate Siding, Rear Roll Up Door, Hard Wood Flooring, Translucent Roof, Two Rows Of E Track, Wood Slats, 3500lbs Tuckaway Liftgate, 83”W 60”L Aluminum Platform, Quality Install Services Available