|
Vacuum cooling retort manufactured by Agri-cool of Holtville, California, in August of 1986. Skid mounted A-C Compressor Corp. Ro-Flo Vacuum Pump, model 1910LG, mounted on a frame 8 ft. by 15 ft. constructed from 8 in. wide flange beam.
|
|
Details
|
Located at:
Bear Mountain Cooling
Vacuum cooling retort manufactured by Agri-cool of Holtville, California, in August of 1986
· Usable inside dimensions of 25 ft. long by 108 in. wide by 101 in. high
· Outside dimension of 26 ft. 4 in. long by 12 ft. wide by 12 ft. high
· Two H.V.V. Vapor Condensing coils, each with 1150 ft2 of condensing surface
· Condensate collectors with vacuum tank and Burks condensate pump
· One 20 in. dia. By 20 ft. long double chamber suction accumulator with liquid level float control and high level alarm
· One Cornell model 2CB-5-4 liquid circulating pump with 5 hp motor and motor starter
· Two doors complete with air lifting cylinders and necessary operating hardware
· Three pallet conveyors, each with 2 ½ in. rollers on 3 in. centers mounted in 4 in. structural channel frames. Complete with electric motor drives, starters and breakers with wiring to main panel
· Necessary refrigeration and vacuum valves to operate system
· Electric and air control panel with switches, gages, and control circuits to manually or automatically operate cooling plant
Skid mounted A-C Compressor Corp. Ro-Flo Vacuum Pump, model 1910LG, mounted on a frame 8 ft. by 15 ft. constructed from 8 in. wide flange beam, complete with the following:
· 125 hp power electric motor with motor base
· Drive pullies, V belts and belt guard
· Exhaust silencer
· Centrifugal oil separator
· Inlet Filter
|
|
